ARNO – ACS Cooling System: the patented cooling system for efficient parting off, grooving and groove turning with the SA and SE grooving systems.
There‘s no cooler and more precise way: In the ACS Cooling System developed and patented by ARNO, coolant is fed directly along the insert seat to optimise insert cooling. Coolant enters the cutting zone, gets underneath the chip and ensures efficient chip removal.
In addition, the ACS2 cools the tool flank from underneath. This results in an average increase in tool life of 300 per cent, higher speed and greater process reliability. Summarizing, the patented ACS Cooling System makes our outstanding SA and SE grooving systems into outstanding productivity boosters.
ACS1 – Coolant under the swarf
ACS1 – Coolant under the swarf
The coolant (1) is guided directly along the insert seat and exits at the cutting zone. It goes under the swarf and removes it efficiently – so reducing wear effectively and increasing tool life.
ACS2 – Two is better than one
ACS2 – Two is better than one
In addition to the coolant hole at the insert seat (1) there is a second coolant hole underneath the insert tool flank (2). This again increases tool life significantly.
Cool benefits
Precise guided coolant – no adjustment needed, no error possible
Average of 300% longer tool life – thanks to significant reduction in wear
Coolant goes under the swarf and causes therefore an optimised chip breakage and chip removal