FT-Face milling system
High cutting rates.
Gentle on the spindle.

Stable and efficient: the FT face milling system from ARNO with 45° approach angle and eight efficient cutting edges.

Maximum stability, soft cutting and smooth action to minimise spindle wear: The FT system from ARNO lets you benefit from all these advantages. This is provided by the large flat face on the holders, a positive rake angle despite the negative mounting position and the unequal pitch of the cutting edges. You are then well equipped for a wide variety of applications to machine steel – from castings through to aluminium – with five different geometries and grades for each type.


In addition the nickel-plated holders, Torx Plus® screws and through tool cooling ensure long tool life and easy handling. And as always with ARNO, you can rely on the excellent price-performance ratio of the FT face milling system.

Holders

Face milling cutter with 45° approach angle

Shell type holders with diameters from 40 to 250 mm and 3 to 20 cutting edges

Nickel-plated body for high wear resistance and easy handling

Torx Plus® screws for high torque transmission

Coarse and close pitch for different materials

Unequal pitch for reliable vibration reduction

Integrated through tool cooling with diameters up to 160 mm, suitable for minimum quantity lubrication

Indexable inserts

Eight efficient cutting edges per indexable insert

Stability due to negative mounting position

Positive rake angle for soft cutting

Five geometries and grades for a wide variety of applications

Highlight combination for machining steel: NMS1 geometry with particularly positive rake angle of 26° for soft cutting and PVD- coated grade AP5440 for unstable conditions

Holders

Face milling cutter with 45° approach angle

Shell type holders with diameters from 40 to 250 mm and 3 to 20 cutting edges

Nickel-plated body for high wear resistance and easy handling

Torx Plus® screws for high torque transmission

Coarse and close pitch for different materials

Unequal pitch for reliable vibration reduction

Integrated through tool cooling with diameters up to 160 mm, suitable for minimum quantity lubrication

Indexable inserts

Eight efficient cutting edges per indexable insert

Stability due to negative mounting position

Positive rake angle for soft cutting

Five geometries and grades for a wide variety of applications

Highlight combination for machining steel: NMS1 geometry with particularly positive rake angle of 26° for soft cutting and PVD- coated grade AP5440 for unstable conditions

Outstanding
services inclusive

Any questions? Contact your personal ARNO contact person:

Write now Or Call +44 01785 850 072 ARNO (UK) Limited
Unit 9, 10 & 11, Sugnall Business Centre
Sugnall, Eccleshall Staffordshire | ST21 6NF